Tel: +44 (0)1494
484844
Email sales@drawntube.com
Precision Tube Production - Alloys
We manufacture Cold Drawn Tubes to your requirements
Contact our sales team on Tel:
+44 (0)1494 484844 Email sales@drawntube.com
We specialise in small quantity and quick delivery.
Alloys
Aluminium Tube Alloy 5154.
| Weight % | 5154 USA | 5154A EWAA |
| Al | Bal | Bal |
| Si | 0.25 max | 0.5 max |
| Fe | 0.40 max | 0.5 max |
| Cu | 0.10 max | 0.10 max |
| Mn | 0.10 max | 0.50 max |
| Cr | 0.15-0.35 | 0.25 max |
| Mg | 3.1-3.9 | 3.1-3.9 |
| Mn+Cr | - | 0.10-0.50 |
| Ti | 0.20 max | 0.20 max |
| Zn | 0.20 max | 0.20 max |
| Others | 0.05 each / 0.15 max |
Availability
Aluminium Alloy 5154A is available in Drawn Tube.
Alloy 5154 A Tube is available the following size ranges.
Outside Diameter - 0.25mm (0.010") up to 16.00mm (0.625")
Wall - 0.05mm (0.002") up to 1.00mm (0.040")
Straight Lengths - 1.00mm (0.040") up to 5000.00mm (197")
Coils Lengths - 5 Metres to 15 Metres
Standard Tolerance- OD &ID +/-0.03mm (0.0012")
Wall +/- 10%
Tight Tolerance - OD&ID +/- 0.015mm (0.0006")
Wall +/-3%
Some thin wall tubes up to 25.40 mm (1.000") can be supplied.
Where specific properties or dimensions are required by a customer our technical and quality departments are available to define and produce suitable standards within exiting BS specifications.
Contact our sales team.
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice
Tel: +44 (0)1494
484844
Email sales@drawntube.com
Site Sponsored by AircraftmaterialsUK.com Ltd
Aluminium Seamless Tube - Aluminium Drawn Tube - Aluminium Precision Tube - Aluminium Aerospace Tube