Tel: +44 (0)1494 484844               Email  sales@drawntube.com

Precision Tube Production - Alloys

We manufacture Cold Drawn Tubes to your requirements

Contact our sales team on Tel: +44 (0)1494 484844 Email  sales@drawntube.com
We specialise in small quantity and quick delivery.  

drawn stainless steel tube,

Welded and drawn stainless steel tube,

Alloys
Stainless Steel 316LVM (1.4441 Implant Grade) Seamless Tube - Specifications X2 Cr Ni Mo 18-15-3, WS 1.4441, UNS S31673

Weight % 316LVM Tube
Cr 17-19
Ni 13-15
Mn 2.00
Si 0.75
Mo 2-3
C 0.03
P 0.25
S 0.1

Availability
Stainless Steel 316LVM (low carbon vacumm melt) is available in Drawn Tube. Stainless Steel 316LVM tube is available in many sizes from stock, however there is a minimum production of 30m.

Stainless Steel 316LVM medical grade Precision Seamless Tube is available the following size ranges.
Outside Diameter - 0.25mm (0.010") up to 16.00mm (0.625")
Wall - 0.05mm (0.002") up to 1.00mm (0.040")
Straight Lengths - 1.00mm (0.040") up to 5000.00mm (197")
Coils Lengths - 5 Metres to 15 Metres
Standard Tolerance- OD &ID +/-0.03mm (0.0012")
Wall +/- 10%
Tight Tolerance - OD&ID +/- 0.015mm (0.0006")
Wall +/-3%
Some thin wall tubes up to 25.40 mm (1.000") can be supplied.

Where specific properties or dimensions are required by a customer our technical and quality departments are available to define and produce suitable standards within exiting BS specifications. Contact our sales team on Tel: +44 (0)1494 484844 Email  sales@drawntube.com


CONTACT OUR SALES TEAM TODAY ON Tel: +44 (0)1494 484844  Email  sales@drawntube.com


Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included here should be used as a guideline only. All specifications are subject to change without notice

Site Sponsored by AircraftmaterialsUK.com Ltd

Aluminium Seamless Tube - Aluminium Drawn Tube - Aluminium Precision Tube - Aluminium Aerospace Tube